egeFit® CleanControl
Your benefits at a glance
Quick-Change System
User-Friendly Operation
Shut-off devices safely and maintenance-friendly installed in the shaft
Optional Leakage Monitoring
Accommodation of Electronic Controls in the Shaft
Pressure Resistant up to 16 bar
For DN 50 – DN 400
Application
After the pipeline has been shut off via the valves, unlock the current insert in the second step to remove it. Then insert the desired new insert and simply lock it with a cordless screwdriver. After opening the valves, the individual shaft solution is immediately fully functional.
Frequently Asked Questions
Which pipeline sizes can be connected?
The egeFit® CleanControl is suitable for pipelines from DN 50 to DN 400 / OD 450. Larger dimensions are available upon request.
Which pressure ratings are available?
Standard up to PN 16; PN 25 and PN 40 are also possible upon request.
Which inserts can be integrated?
Various fittings can be used, including: water meters, pressure reducers, air release and ventilation valves, pigging inserts, sensors, hydrants, flushing systems. Custom or individual inserts are also possible.
What are the dimensions of the system?
The system with valves has the following dimensions:
- DN 50-80: approx. 690 mm
-
DN 125-200: approx. 1350 mm
-
DN 250-400: approx. 2200 mm
For which application areas is the system suitable?
egeFit® Clean Control can be used in the following areas:
-
Service Water
-
Drinking water
-
Geothermal Energy
-
Biogas
-
District and Local Heating
-
Firefighting Water
-
Saltwater
What material is the device made of?
The device is made of stainless steel V4A (1.4571) and is acid and alkali resistant.
Which installation depths are possible?
Installation depths of up to 3.5 m are recommended.
Which traffic loads can the egeFit® withstand?
The system is designed for traffic loads up to SLW 60.
Which shut-off devices are possible?
All common shut-off devices can be used.
Which tools are required for installation?
For installation, the valve key and, if necessary, a cordless screwdriver are required.
How heavy are the inserts?
-
Standpipe DN 100: approx. 12 kg
-
Standpipe DN 200: approx. 16 kg
Can the system be monitored?
Yes, shaft monitoring in 3L is possible. In addition, installations can be monitored by float switches.
PE Shafts with egeFit® CleanControl System
With the egeFit® CleanControl system, the operator has access to their pipeline from ground level. In contrast to conventional inspection openings, the egeFit®CleanControl system offers much more.
It not only allows easy access to the pipeline but also permits the use of a variety of technical components such as water meters, sensors, flushing inserts, or pigging stations. These can be maintained or exchanged for other inserts from ground level at any time within minutes.
The individual shaft solution also offers the possibility to integrate sensor inserts into the pipeline for temporary measurements. The quick-change system of the egeFit
The egeFit® CleanControl system represents a particularly economical solution for utilizing inserts in various shafts.
The egeFit® CleanControl system, along with the corresponding shut-off devices, is factory-installed in a monolithic PE shaft. This ensures that not only the system itself but also the corrosion-resistant and maintenance-friendly shut-off devices are accessible at all times.
The required PE shaft is manufactured individually according to your structural specifications and delivered to the construction site as a plug-&-play solution.
Do you have specific questions and would like to learn more about the new egeFit® CleanControl?
